規格參數
確認接口類型、端口速率、傳輸距離、單/雙端口、功耗、安裝形態和是否需要配套線纜或光模塊。

康普RUCKUS® ICX7550交換器提供Wi-Fi 6部署及更高需求所需的卓越性能和可擴展性,配備多達48個千兆連接連接埠,每個連接埠提供90瓦的802.3bt PoE功率,支援永久和快速啓動的PoE功能。該交換器具有市場領先的堆疊密度,每個堆疊最多可容納12個交換器(多達576個千兆、萬兆或光纖連接埠),並將機箱級性能與可堆疊解決方案的「隨增長付費」可擴展性相結合。這款中端市場可堆疊交換器是同類產品中首批提供100 GbE上行鏈結的產品之一,使企業能夠在利用現有光纖基礎設施的同時,大幅提高網路容量。
Ruckus Icx7550-24-E2 24口10/100/1000 Mbps,2個40Gbps QSFP+雙模上行鏈結/堆疊連接埠,模組化插槽。捆綁包包括2個400W交流電源適配器
電源和3個風扇,前後氣流,連接埠模組需單獨購買。
| 「RUCKUS ICX7550-24-E2」規格: | RUCKUS ICX 7550-24-E2 |
| Switching capacity (data rate, full duplex) | 368 Gbps |
| Forwarding capacity (data rate, full duplex) | 274 Mpps |
| 10/100/1000 Mbps RJ45 ports | 24 |
| 100/1000 Mbps/2.5 Gbps RJ45 ports (full duplex only) | - |
| 100/1000 Mbps/2.5/5/10 Gbps RJ45 downlinks (full duplex only) | - |
| Fixed ports: 100/1000 Mbps SFP downlinks | - |
| Fixed ports: 1/10 Gbps SFP/SFP+ downlinks | - |
| Modular ports: 1/10 Gbps SFP/SFP+ uplinks | 4 |
| 40 Gbps QSFP+ uplinks (max) | 4 |
| 40/100 Gbps QSFP28 uplinks (max) | - |
| PoE/PoE+ ports | - |
| Perpetual/Fast boot PoE ports | - |
| 802.3bt (90W) ports | - |
| Base IPv4/v6 L3 routing (Static routing, RIP) | y |
| Advanced IPv4/v6 L3 routing (BGP, OSPF, RIP, VRRP, PIM, PBR features) | With license |
| 「RUCKUS ICX7550-24-E2」規格: Aggregated Stacking Bandwidth | 960 Gbps |
| Stacking density (Max switches in a stack) | 12 |
| Stacking ports (Max ports usable for stacking) | Up to 2 x 40G QSFP+ |
| Max stacking distance (between stacked switches) | 10 Km |
此段需依「RUCKUS ICX7550-24-E2」的來源脈絡核對。
確認接口類型、端口速率、傳輸距離、單/雙端口、功耗、安裝形態和是否需要配套線纜或光模塊。
核對服務器、交換機、系統版本、固件版本、插槽條件、散熱條件和現網設備互通要求。
明確計劃數量、上線時間、預算範圍、交付地點、是否需要備件和是否接受同級替代型號。
對穩定性、吞吐、延遲或相容性要求較高的專案,建議提前安排 PoC 或部署前技術確認。